Tools such as Hitachi C10FCE2 and Dewalt DW718 miter saws are a little
bit different than most power tools when it comes to the routine maintenance.
In most cases, the main reason for keeping power tools such as sanders, sanders or drills in good condition is so that they are ready to be used when you are
about to start your work. While this might be one of the reasons to maintain
your power saw, the main reason is safety as miters can be dangerous if they
are used when not in a good condition.
Fortunately, Hitachi C10FCE2 and Dewalt DW718 saws have an outstanding reputation for
safety, reliability and they are also sold with the best warranties which you
cannot find easily in the industry. These saws come with a one year free
service contract, three years limited warranty and ninety days money back
guarantee. The durability of these tools means that you will probably never
need to take the advantage of this warranty program. However, in order to keep
these saws in great condition, they should have regular maintenance.
The following tips will not only keep your saw safe but also in an
excellent condition.
1. Check the safety features of these saws.
When you have stayed for a while without using your saw, it is always important
to check the safety features before using it. These include safety interlock
trigger systems and blade guards. Therefore, it is important to check out and
ensure that their miter locks and bevel on the miter saws are working properly.
2. Clean your Hitachi C10FCE2 and Dewalt DW718 saws thoroughly after use.
2. Clean your Hitachi C10FCE2 and Dewalt DW718 saws thoroughly after use.
Clean saws are always reliable & safe to use. You can use a few blast of
condensed air to get out sawdust in the crevices and cracks.
3. Check that all screws and bolts are tight.
3. Check that all screws and bolts are tight.
Ensure that you always check all screws and bolts are tight before using the
saw. You do not want anything moving while using the saw that is not supposed
to. Sudden spinning blade, movements are not good when you are using the saw.
4. Lubricate your saw.
4. Lubricate your saw.
Use spray lubricants on all moving parts such as the mechanism and miter saw
arm that lowers and raises Hitachi C10FCE2 and Dewalt DW718 saw blades.
5. Always keep your saw in a dry place.
5. Always keep your saw in a dry place.
Keeping your saw in a wet place is not recommended since exposing it to
moisture can make the motor to rust over time.
6. Check the power cord.
6. Check the power cord.
It is important to check your power cord regularly. Replace a cord with broken
or frayed insulation before using your saw.
7. Use sharp blades.
7. Use sharp blades.
Only use sharp blades & proper blade for the materials which you are
cutting. Blunt blades can put stress on the saw's motor & they may cause
the materials which you are cutting to kick-back while cutting.
8. If used outside, have a tarp close-by.
8. If used outside, have a tarp close-by.
While Hitachi C10FCE2 and Dewalt DW718 miter saws are portable, they cannot be
moved easily as smaller power tools. Therefore, it is important to have a
plastic tarp close by when you are working outside in case of sudden rain.
Always follow the above maintenance tips for your Hitachi C10FCE2 and Dewalt DW718 saws in order to keep your saw working properly & safely.
For more information, I recommend you refer to this site.
Always follow the above maintenance tips for your Hitachi C10FCE2 and Dewalt DW718 saws in order to keep your saw working properly & safely.
For more information, I recommend you refer to this site.